Abradant International
Img
ASME 'U' CERTIFIED
ABRASIVE BLAST MACHINE

Abradant Abrasive Blast Machines are fabricated by Jolly Industries in accordance with ASMe pressure vessel code section VIII to a working pressure of 150 psi.

Read more
Img
ASME 'U' CERTIFIED
AIR RECEIVER

Material of construction in ASME SA510 Gr.70 Boiler and Pressure Vessel class Carbon Steel Plate.

Read more
Img
ABRASIVE SAND BLASTING MACHINE

Abradant offer a range of portable blasting machines able to cope with virtually all types of blasting environment.

Read more
Img
BL1080A (MANUAL & AUTOMATIC)

Smallest of the range holding approximately 25 kgs of expandable abrasive. The machine can be fitted with steel grit valve or flat sand valve.

Read more
Img
BL14160 (MANUAL & AUTOMATIC)

This machine is the smallest contractor unit in our range. It can be loaded into the back of a small commercial vehicle or estate car by one man with great ease, giving reasonable production rate coupled with lower air consumption.

Read more
Img
BL20300 (MANUAL & AUTOMATIC)

This machine has a low centre of gravity for ease of handling/mobility when used on even ground or difficult site conditions. With good abrasive capacity, this machine will blast up to 10 to 18 square metres per hour.

Read more
Img
BL24650 (MANUAL & AUTOMATIC)

The machine is a contractor’s machine finished in blue hammerite. The machine is capable of operating continuously at a maximum working pressure of 150 PSI. The machine has been hydraulically pressure tested to 300 PSI.

Read more
Img
AIR RECEIVER

Tank type air receiver or manifolds provide multiple air outlets with ball valve controls and 2" Air Inlet with Four Jaw coupler, Air Relief Valve, Pressure Gauge and Drain Valve.

Read more
Img
AIR COOLED AFTER COOLERS

Air cooled compressed air aftercoolers cools the compressed air with atmospheric air. The BL Series is a complete aftercooler package designed to work on most models of rotary air compressors.

Read more
Img
DESICCANT DRYERS

The compressed air is passed through a pressure vessel, This desiccant material attracts the water from the compressed air via adsorbtion

Read more
Img
COALESCENT FILTER

Coalescing Oil Removal Filter
High efficiency coalescing filters removing liquid water and oil aerosal

Read more
Img
DEHUMIDIFIERS

Electrical units can be operated with 440/480, 3 phase 60Hz, (380, 3 phase, 50Hz power optional). They have the capability of providing four functions.

Read more
Img
MOISTURE SEPARATORS

For Heavy duty application with minimum pressure drop requirements, installs at blast machine inlet, supplied with 40 micron polypropylene or brass element with manual drain.

Read more
Img
REMOTE CONTROL SYSTEMS & HANDLE

We offer remote control valves for all our machines, which allows for one man operation.

Read more
Img
NOZZLE HOLDERS

A lightweight receptacle for your nozzle. Lighter weight than metal nozzle holders, large thread makes changing nozzle easy.

Read more
Img
BLAST SYSTEM PACKAGE

Blast machine with FSV metering valve, pneumatic remote control system with deadman handle, moisture separator, screen, cover, 20 m 32 x 8 heavy duty blast hose coupled with nylon nozzle holder and cast iron quick coupling.

Read more
Img
ABRASIVE METERING VALVES

A full selection of abrasives metering valves including Flat Sand Valve, Micro Valve, Steel Grit Valve, Abrasive Membrane Valve, Thompson Valve.

Read more
Img
BLAST HOSES

A long-lasting heavy-duty hose exceptionally tough and abrasion resistant, for use in sand and steel blasting service; it is manufactured with anti-static rubber granting a complete discharge of static electricity.

Read more
Img
AIR HOSES

When it comes to conveying air to the workplace consider quality airlines for Safety, Economy and Long Life. Failures can prove costly in down time. We have a wide range available and outline some on this page.

Read more
Img
BLAST HOSE COUPLINGS

A full range of quality couplings to suit our range of shotblast hose products. Quick Couplings for fast safe coupling of hoses. All couplings with interconnecting locking lugs adapt to any size available in Cast Iron and Nylon.

Read more
Img
INTERLOCKING COUPLINGS

Oil resistant washers with precise casting, superior sealing action and complete interchangeability

Read more
Img
INTERNAL PIPE CLEANING EQUIPMENT

Abradant offers different type of Internal Pipe blasting equipment for 3/4" to 36" Dia. pipes.

Read more
Img
VENTILATION SYSTEMS

Venturi Air Blowers for ventilation and to cool down machinery or workers.

Read more
Img
FITTINGS & SPARES

Abradant offers you the complete range of fittings and spares of machineries we supply.

Read more
Img
SHORT VENTURI NOZZLES

The reduced length of these nozzles makes them ideal for areas where access is limited.

Read more
Img
STEEL GRIT VALVE

Steel grit valve regulates abrasive flow to ensure that your machine is running economically and is designed for the precise metering of abrasive into the compressed air flow at the outlet of a blast machine.

Read more
Img
BTV VALVE

BTV valve is a normally closed abrasive metering valve requiring air supply to open it, thus permitting abrasive flow. It is utilized in pressure hold applications where quick on/off blasting is essential.

Read more
Img
FLAT ABRASIVE VALVE

Manufactured from high quality non corrosive alloy, this valve is recommended for use with non metallic abrasives. Precise abrasive flow can be easily controlled by two stainless steel discs.

Read more
Img
BMV

These are simple and reliable abrasive metering valves with precise screw adjustments with long life.

Read more
Img
GARNET VALVE

Fixed orifice abrasive metering valve, specifically designed for use with garnet. A urethane insert within the centre of the valve is featured to provide accurate garnet metering and consistent flow.

Read more
Img
END HOSE COUPLING

The ME Series of air hose fittings are used to adapt metal pipe on your equipment to accept 2-lug and 4-lug air hose fittings. Our 2-lug ME fittings have male NPT threads while the larger 4-lug ME fittings have female NPT threads.

Read more
Img
INTERNAL AIR HOSE COUPLING

Abradant offers 2-lug fittings to fit 1/2, 3/4" and 1" I.D. air hose and 4-lug fittings for 1-1/4", 1-1/2" and 2" I.D. air hose.

Read more
Img
WHIPCHECK SAFTEY CABLES

Whipcheck Safety Cables provide additional job site safety measures. Safety Cables, or Whipchecks, should be used on all blast hose and air hose connections to reduce the danger caused by hose coupling failure.

Read more
Img
INTERLOCKING CLAMPS

Re-use your 2-lug and 4-lug hose end air hose fittings by assembling them with Boss clamps. Standard tools are used to secure the clamps to the hose, which eliminates having special banding tools when you're in the field.

Read more
Img
BLAST NOZZLES

Blastline venturi blast cleaning nozzles are available with a choice of liners and in a wide range of styles, sizes and lenghts to suit all applications. Most are available with either a 32 mm diameter or 25 mm entry.

Read more
Img
LONG VENTURI NOZZLES

With all the excellent durability and wear resistance properties of aluminium jacketed nozzles, the tungsten carbide liner is encased in a soft nylon jacket which absorbs shock, reducing the threat of premature failure from liner damage.

Read more
Img
ANGLED NOZZLES

Angled tungsten carbide blast nozzles are ideal for cleaning inacessible areas (e.g. pipe internals, behind angles) and are available with one, two or three outlets, each in a range of bore sizes.

Read more